PET Bottle Washing line is configurate as per contimination in input bottle condition. We provide 500 to 2000 kg/hr Fully automatic plant. Consisting of
COMPLETE TURN-KEY PLANTS
Outputs:
- 500 Kg/h ± 10%
- 1000 Kg/h ± 10%
- 2000 Kg/h ± 10%
- 2500 Kg/h ± 10%
- 3000 Kg/h ± 10%
- Highly decontaminated flakes
- Low water consumption
- Environment friendly washing process with low chemicals consumption
- Highly automated recycling process with a very poor need of manpower.
RPET-FLAKES PERFORMANCES
- PVC < 40 PPM
- PO < 10 PPM
- PAPER < 10 PPM
- GLUE < 10 PPM
- RESIDUAL pH < 10
- HUMIDITY < 0,7%
- COLOR b < 3
- Δ COLOR b < 4
EXTRUSION PLANTS MANUFACTURING PROGRAM FOR THE RE-USE OF PET-FLAKES
A) Thermoformed sheets : sheeting lines and/or thermoforming plants
B) pellets : by means of pelletizing lines for Bottle-to-bottle process, straps and fibers.
C) Fibers: directly produced from the flakes.
The pelletizing lines as per point B can perform following outputs :
- 500 Kg/h ± 10%
- 1000 Kg/h ± 10%
- 1250 Kg/h ± 10%
Features:
- Extruders with multiple venting
- Excellent maintenance of Viscosity Index and Color b
Label Stripper/Scraper is to remove label from Grinded PET Bottle. It is design as per the output i .e kg/hr.
Panchal provides an ideal choice of granulators for PET Bottle supplied with Wet & Dry both model Wet Grinder give better cutting, less fines generation and long life blade interval. Model Cutterhouse opening ...
Sink-float tank is used for floating material like film/lables like LDPE/HDPE/PP etc on the top and at the bottom all the sink material ilke PVC/PET/PC etc. both have different Discharge point to collect different material, based on density. It is mfg. as per application and size/capacity kg/hr.
Centrifugal Dryer (Vertical type) is an Centrifuge which remove surface water from Soft to Rigid material Input Moisture 25% Output Moisture 2-3% Rigid material like HDPE/PS/ABS/PET Flakes Soft material like LDPE/HDPE/PP Film.
Label Separator is to remove label/paper from Grinded PET Bottle flakes. It is design as per the output i .e kg/hr.
The material is conveyed through a circular tube arrangement. This design is for low volume throughputs. The Product stream is sucked together with the hot air into the blower. Passing the blower, the product is turbulent contact with the hot air, and blown through a circle shaped drying section of ...
Brochures
